17
Rigging process
Start the rigging process by blocking the work area below, and make sure the work is performed from a stable platform.
1
Check that the clamp is undamaged and can bear at least 10 times the weight of the fixture. Check that the structure
can bear at least 10 times the weight of all installed fixtures, clamps, cables etc.
2
Bolt the clamp securely to an omega bracket with a M12 / ½” bolt (min. grade 8.8) and lock nut.
3
Align the omega bracket with two 1/4-turns in the base bracket. Insert the fasteners into the base bracket and turn
both levers a full 1/4-turn clockwise to lock.
4
Working from a stable platform, hang the fixture on a truss, or other structure. Tighten the clamp.
5
Install a safety wire that can bear at least 10 times the weight of the fixture. The
attachment point is designed to fit a carbine.
6
Verify that there are no combustible materials or surfaces to be illuminated within
0.3 m (12 in.) of the fixture.
7
Check that there is no possibility of head or yoke colliding with other fixtures.
Содержание 80031501
