SGM 80031501, Руководство пользователя

Страница: 25 / 60

25
Using stand-alone operation
Stand-alone operation is where the fixture is not connected to a control device, but is preprogrammed with a series of up to
24 scenes, that play continuously in a loop. Up to three stand-alone programs can be defined and run from the menus, and
one of the programs can be set to run by default whenever the fixture is started.
Each of the three available stand-alone programs contains 24 user-definable scenes, each scene with its own RGB and
shutter settings. Each scene has a definable fade-in time, for the transition from one color to the next, and a wait (static) time,
each of up to 120 minutes and 59 seconds in duration.
To define a stand-alone program, use the “Manual
→ Editor” menus (see “Control menu” on page 32).
Stand-alone mode at fixture startup is enabled using the
“Settings
→ Startup mode → Select startup mode → Standalone” menu.
The program to be run is selected using the “Settings
→ Startup mode
→ Startup program” menu (see “Control menu” on page 32).
The chosen program will run its length cyclically whenever the
fixture is powered on.
To run an internal program to go:
MENU → MANUAL → RUN PROGRAM.
To stop an active internal program go to:
MENU → MANUAL → STOP PROGRAM.