sewerin SeCorr 08 страница 6 Скачать руководство пользователя

Страница: 6 / 57

Warranty & Used symbols

Used symbols:

CAUTION!

This symbol is used to indicate dangers which may

either result in hazards for the operators or in severe

damage – or even destruction – of the product.

Note:

This symbol is used to call attention to information

and tips which may be helpful and which are exceed-

ing the basic operating procedures.

The following instructions must be complied with in order for any warranty

to be applicable in respect of the functionality and safe operation of this

equipment.
Hermann Sewerin GmbH accepts no liability for any damages resulting

from failure to observe these instructions. The warranty and liability provi

sions of the terms of sale and delivery of Hermann Sewerin GmbH are not

affected by the information given below.

The product must only be operated after the relevant operating instruc

tions have been read and understood.

The product must only be used for its intended purpose.

The product is only suitable for use in industrial and commercial ap

plications.
Repairs must only be carried out by a specialist technician or by other

suitably trained personnel.

Changes or modifications to this product must not be carried out with

out approval from Hermann Sewerin GmbH. The manufacturer cannot

be held responsible for damages if non-approved modifications have

been made.

All repairs must be carried out using replacement parts that have been

approved by Hermann Sewerin GmbH.

The manufacturer reserves the right to make technical modifications in

the course of further development.

Generally applicable safety and accident-prevention regulations must be

complied with, in addition to the information provided in this manual.

Содержание SeCorr 08


























































Результаты поиска

Содержание SeCorr 08

Отзывы:

Похожие инструкции для SeCorr 08

Бренды по названию

Популярные бренды

sewerin SeCorr 08, Руководство по эксплуатации

Результаты поиска

Содержание SeCorr 08

Отзывы:

Похожие инструкции для SeCorr 08

Бренды по названию

Популярные бренды