25
7 Menu
Select a file with the Arrow keys and confirm your selection
z
with the Enter key.
If you have opened a measurement, it will then be displayed.
z
If you have opened a noise signal, the noise will be played back
with a phasic duration of 7 seconds. You can cancel the playback
by shortly pressing on the ON/OFF key.
7.3.3
Delete
Use the Arrow keys to select the item which you want to
z
delete:
low resolution, high resolution or noise. Confirm your selection
with the
Enter key. A list is displayed including all files of the
SeCorr 08
memory.
Select the file which you want to delete with the Arrow keys
z
and confirm your selection with the Enter key. The file is then
deleted.
7.4
Filtering
You can use the filtering function to cut off certain frequencies from
the correlation function, thus leading to improved results.
You can select between manual or automatic filtering.
7.4.1
Automatic filtering
After a
measurement,
SeCorr 08
performs an automatic filter run
(post-processing). During this procedure the filters are automati
-
cally optimised.
7.4.2
Manual filtering
An image is generated in which you can see a frequency trend
(filter base at the bottom of the image, see chapter 7.4.3.3), as
well as the result based on the set filters (representation, see
chapter 7.6.4).
