SEW-Eurodrive MOVITRANS TES31A, Руководство по эксплуатации продукта

Страница: 28 / 72

5
Single-point synchronization
Restrictions of the parameters
Product Manual – MOVITRANS
®
TES31A Decentralized Supply Unit Synchronization
28
5.2 Restrictions of the parameters
Activating the synchronization function has the following effects:
• That certain parameters can no longer be set to the full extent.
• That the unit behavior changes in comparison to the unit behavior described in the
relevant MOVITRANS® TES31A Decentralized Supply Unit documentation.
Index Parameter Restrictions
Dec Hex Sub
8335 208E 0 Binary input DI01 Setting blocked.
8350 209E 0 Binary output DO01 Setting blocked.
8843 228B 0 Binary output DO00 Setting blocked.
8461 210D 0 Setpoint source Master: All sources except for
SBus2 can be set.
Slave: Setting blocked.
8462 210E 0 Control signal source Master: All sources except for
SBus2 can be set.
Slave: Setting blocked.
10235 27F9 1 "DC link under-
voltage" fault re-
sponse Setting blocked.
10244 2804 1 "Sync timeout" fault
response Setting blocked.
9729 2601 4 "Line phase failure"
fault response Setting blocked.
10538 292A 100 Operating mode Setting blocked.
10232 27F8 27 Ramp time T00 Master: Do not set ramps to under
500 ms.
Slave: Setting is ignored.
10232 27F8 28 Ramp time T01 Master: Do not set ramps to under
500 ms.
Slave: Setting is ignored.
10232 27F8 29 Ramp time T10 Master: Do not set ramps to under
500 ms.
Slave: Setting is ignored.
10232 27F8 30 Ramp time T11 Master: Do not set ramps to under
500 ms.
Slave: Setting is ignored.
29190657/EN – 04/2020