SEW-Eurodrive MOVITRANS TES31A, Руководство по эксплуатации продукта

Страница: 17 / 72

4
Multi-point synchronization
Requirements
Product Manual – MOVITRANS
®
TES31A Decentralized Supply Unit Synchronization
17
4 Multi-point synchronization
4.1 Requirements
4.1.1 General information
The project planning of a MOVITRANS
®
system calls for specified knowledge ex-
plained in this documentation.
The following information is based on the general guidelines that apply to project plan-
ning. This documentation is drawn up for users that are familiar with and have basic
knowledge of drive project planning.
4.1.2 PC and software
The "Multi-point synchronization" function is part of the unit firmware. You will need
the SEW‑EURODRIVE software MOVITOOLS® MotionStudio for configuring the sup-
ply units.
4.1.3 Permitted operating modes
In the "Multi-point synchronization" mode, the supply units continue to operate in their
individually set operating modes.
INFORMATION
For more information on the operating modes, refer to the following documentation:
MOVITRANS® TES31A Decentralized Supply Unit
29190657/EN – 04/2020