4
Installation
Electrical installation
Operating instructions – ECDriveS
®
24
Removable I/O terminal strip [2]
This is a removable 5-pin connector with screw terminals. Cable sizes are within the
range of 0.4 mm
2
and 1.5 mm
2
(28 AWG and 16 AWG).
[1]
[2]
[3]
[4]
[5]
19853478795
[1]
Pr24 V output voltage if error state is active
[2]
+24 V input voltage activates speed control (see section Run A and Run B)
[3]
+24 V input voltage activates speed control (see section Run A and Run B)
[4]
At an input voltage of +24 V, the motor runs against the direction selected on
DIP switch 6
[5]
0 V ground connection
Run A Run B Description
ON
OFF
Motor roller starts and runs with 100% of the speed selected on DIP
switches 1 to 5
OFF
ON
Motor roller starts and runs with 50% of the speed selected on DIP
switches 1 to 5
ON
ON
Motor roller starts and runs with 75% of the speed selected on DIP
switches 1 to 5
OFF
OFF
Motor roller stops
28507088/EN – 11/2018
