4
Installation
Mechanical installation
Operating instructions – ECDriveS
®
19
Continue with opposite side:
[1]
[2]
19520502923
[1]
Profile hole
[2]
Spring axis
3. Press spring axis [2] inwards on the opposite side and insert the motor roller into
the conveyor.
4. When the motor roller reaches its proper position on the profile hole [1], release
spring axis [2].
Continue with cable side:
[1]
[2]
19844223243
[1]
M12 flange nut
[2]
Axis
5. Screw the flange nut [1] from outside onto the axis [2] on the cable side.
6. Grip axis [2] from inside with a suitable tool and tighten the flange nut [1] with a
tightening torque of 50 Nm.
28507088/EN – 11/2018
