SEW-Eurodrive CM3C63-100, Руководство по эксплуатации

Страница: 13 / 120

2
Safety notes
Startup/operation
Operating Instructions – CM3C63 – 100
13
2.11 Startup/operation
Make sure the connection boxes are closed and screwed before connecting the sup-
ply voltage.
Depending on the degree of protection, products may have live, uninsulated, and
sometimes moving or rotating parts as well as hot surfaces during operation.
When the device is switched on, dangerous voltages are present on all power connec-
tions as well as on any connected cables and terminals. This can also be the case if
the motor is at standstill.
Risk of burns due to arcing: Do not disconnect power connections during operation.
Do not connect power connections during operation.
Mechanical blocking or internal protective functions of the product can cause a motor
standstill. Eliminating the cause of the problem or performing a reset may result in the
drive restarting automatically. If, for safety reasons, this is not permitted for the drive-
controlled machine, first disconnect the product from the supply system and then start
troubleshooting.
Risk of burns: The surface temperature of the product can exceed 60 °C during opera-
tion. Do not touch the product during operation. Let the product cool down before
touching it.
2.12 Inspection/maintenance
Use only genuine spare parts in accordance with the valid spare parts list.
26870460/EN – 05/2021