SEW-Eurodrive CM3C63-100, Руководство по эксплуатации

Страница: 90 / 120

6
Startup
General information
Operating Instructions – CM3C63 – 100
90
WARNING
Disabling functional safety devices.
Severe or fatal injuries.
• Only qualified personnel is allowed to carry out work on functional safety compo-
nents.
• Any work on functional safety components must be carried out by strictly ob-
serving the specifications in the operating instructions at hand and the respective
addendum to the operating instructions. Otherwise, the warranty will become
void.
CAUTION
The surfaces on the drive can be very hot during operation.
Risk of burns.
• Let the motor cool down sufficiently before you start working on it.
NOTICE
The maximum limit torque (M
pk
) and the maximum current (I
max
) may not be ex-
ceeded, not even for acceleration.
The drive system might be damaged.
• Limit the maximum current at the inverter.
NOTICE
If the hand lever is not removed after startup, the brakemotor can be damaged.
Possible damage to property.
• Remove the hand lever after startup of brakemotors with self-reengaging manual
brake release.
NOTICE
Destruction of the motor due to multiple acknowledgments of a motor protection
fault.
Damage to property, damage to the motor.
• First, determine the cause of the fault before acknowledging a motor protection
fault.
• Do not acknowledge a motor protection fault more than once.
INFORMATION
Observe the following for motors with BK.. and BZ.. brakes:
• Only operate the brake as holding brake.
• The brake may only be applied when the speed is ≤ 20 min
-1
. For higher speeds,
please contact SEW‑EURODRIVE.
• Emergency stops from higher motor speeds are permitted.
26870460/EN – 05/2021