SEVEN WR-Z16 Скачать руководство пользователя страница 118

Страница: 118 / 172

Chapter 7:

Monitoring

& Logging

118

v3.3-a 12/07/2022

network device

s. It is a part of Transmission Control Protocol ⁄ Internet Protocol (TCP⁄IP) protocol

suite.

SNMP is one of the widely accepted protocols to manage and monitor network elements. Most

of the professional

–

grade network elements come with bundled SNMP agent. These agents must

be enabled and configured to communicate with the network management system (NMS).

7.2.1 Configuration

In order to understand the SNMP configuration, it is important to enumerate the configuration

files in the device:

•

/wr/etc/snmp/SEVEN-PRODUCT-MIB.txt: It contains the MIB file with all the SNMP OIDs

in the device.

•

/etc/snmp/snmpd.conf: It contains the global SNMP configuration. This file can be

modified to customize the configuration.

•

/usr/share/snmp/snmpd.conf: It contains the SNMP configuration managed by Seven

Solutions software.

•

/var/lib/snmp/snmpd.conf: It contains the SNMPv3 persistent data.

•

/var/log/snmp/gpa_passwd.log: It contains the SNMPv3 user passwords change.

SNMP file route

These files are located into /media/data/usr/local/... to make it persistent between

reboots and firmware updates.

/usr/share/snmp/snmpd.conf modification

This file is automatically generated. Any manual changes will be lost when relaunching

the SNMP daemon.

The SNMP parameters sub-tree is located under misc and is divided in three main parts:

•

SNMP: General SNMP information.

OID

Name

Value type

Description

13.3001.1 Location

<String>
(i.e.,My location)

Name of the corresponding location.

13.3001.2 Contact

<String>
(i.e.,[email protected])

Contact information.

•

v1/v2: Parameters for SNMP v1 and v2.

Содержание WR-Z16













































































































































































Результаты поиска

Содержание WR-Z16

Отзывы:

Бренды по названию

Популярные бренды

SEVEN WR-Z16, Руководство пользователя

Результаты поиска

Содержание WR-Z16

Отзывы:

Бренды по названию

Популярные бренды