SEVEN WR-Z16, Руководство пользователя

Страница: 117 / 172

Chapter 7: Monitoring
& Logging
117
v3.3-a 12/07/2022
Log rotation
The rotation only affects the files with extension .log. Other files contained in
/var/log/ folder are not affected.
7.1.5 Configuration
The logging configuration can be performed through the wrz_config tool in the CLI. Once the tool
is launched, the logging configuration parameters can be found under Management > Logging.
Figure 7:1 - Logging configuration parameters through CLI.
The logging sub-tree is located under Misc. section and contains the following parameters:
OID Name Value type Description
13.2000.1 Server IP <IP address>
(i.e.,
192.168.1.5)
IP address from the remote logging server.
13.2000.2 Server port <Integer>
(i.e., 514) Port information from the remote logging server.
13.2000.3
Protocol <Enum>
- UDP.
- TCP. Communication protocol for remote logging
between the device and the server.
13.2000.4
Verbose all <Enum>
- Disabled.
- Enabled. High verbosity logging configuration for modules and
log information.
13.2000.5
Log autosave <Enum>
- Disabled.
- Enabled. Automatic permanent logging backup in the
directory /root/.log with a periodicity of 6 hours in
case of power cuts.
13.2000.6 Log N rotate <Integer>
(i.e., 5) Number of logdumps rotations stored in the device.
7.2 SNMP
Simple Network Management Protocol (SNMP) is an application
–
layer protocol defined by the
Internet Architecture Board (IAB) in RFC1157 for exchanging management information between