Sesamo smart PRO, Руководство по эксплуатации

Страница: 75 / 84

75
SESAMO SMARTPRO
MODEL SERIAL NUMBER DATE
▪
SMARTPRO
USER MANUAL
PURPOSE OF THE MANUAL
These instructions are intended for the manager or user of a SESAMO automatic doors installation. In order to obtain
the best performance from the automatism, Sesamo recommends that you read and carefully follow the user
instructions in this manual. This device has been designed for the automation of swinging doors. Any other use will be
considered contrary to the use provided for by the manufacturer who, therefore, cannot be held responsible. Do not
tamper with or modify the internal equipment of the automatism or any of the safety devices provided in the control
unit for any reason. The manufacturer accepts no responsibility in the event the internal parts of the automatism are
modified or tampered with or if safety devices are used in the system which are different from those indicated by the
manufacturer.
Automatism’s security is left to the photocells or to the active safe sensors that detect the pr esence of any obstacles
in the area of passage and eventually prevent re-closing of the doors.
As an additional safety, the automatism is equipped with a sophisticated microprocessor device which in the event of
danger limits the pushing force of the door, so as not to constitute a source of danger to persons in transit.
For safety reasons, the automatism is designed so that it is always possible, even in case of power failure and battery,
move the wings by hand
GENERAL NOTES REGARDING SECURITY
The following precautions are an integral and essential part of the product and must be delivered to the user that
must read them carefully as they contain important instructions for use and maintenance safety.
Inside the equipment there are currents and voltages high enough to endanger life.
•
You must keep these instructions and forwarded to all possible future user of the system.
•
The manufacturer can’t be held responsible for any damage caused by improper, incorrect and / or
unreasonable action.
•
Avoid operating in the proximity of hinges and / or moving mechanical parts.
•
Do not enter the range of the door while it is in motion.
•
Do not oppose the movement of the door because it can be dangerous.
•
Do not allow children to play or stay within range of the door.
•
Keep out of the reach of children any control device to prevent the door from being activated involuntarily.
•
All cleaning of the internal parts, maintenance or repair work must be performed by qualified personnel. To
ensure the efficiency of the system and its proper functioning is essential to follow the manufacturer's
instructions by carrying out by professionally qualified due maintenance.
•
Do not clean the cover of the automation by running water directly on the area to be treated.
•
In particular, it is recommended to periodically check the correct operation of all safety devices.
•
Failure to observe with the above may create dangerous situation.
•
In case of assistance, this manual should be made available to the operator who will perform the operation.
•
All installation, maintenance and / or repair must be documented and made available to the user.
USER AND MAINTENANCE MANUAL
OPERATOR “SMARTPRO”
FOR SWING DOORS