Sesamo smart PRO, Руководство по эксплуатации

Страница: 4 / 84

4
SESAMO SMARTPRO
1. WARNING FOR THE INSTALLER ( GENERAL SAFETY
OBLIGATIONS)
1) It is important for the personal safety to install the automatism in accordance with the
instructions. Incorrect installation or incorrect use of the product can lead to serious personal injury.
2) Read carefully the instructions before starting to install the product.
3) Keep the instructions for future reference.
4) This product was designed and built exclusively for the use indicated in this documentation. Any
other use not expressly indicated could compromise the integrity of the product and /or represent
a source of danger.
5) SESAMO declines any responsibility deriving from misuse or use other than that for which the
automatism is intended.
6) Do not install the appliance in an explosive atmosphere: the presence of flammable gases or
fumes is a serious safety hazard.
7) SESAMO is not responsible for failure to observe Good Technique in the construction of the
closing elements to be motorized, as well as for any deformation that may occur during use.
8) Before carrying out any work on the system, disconnect the power supply.
9) Check that there is a differential switch upstream of the system.
10) Check that the earth installation is done in a workmanlike manner.
11) The safety devices (EN 12978 standard) protect any dangerous areas from mechanical
mouvements risks, such as crushing, conveying, shearing.
12) For maintenance use only SESAMO parts.
13) Do not make any modifications to the components that are part of the system.
14) The installer must provide all information relating to the manual operation of the system in the
event of an emergency.
15) The user must not attempt any kind of repair or direct intervention and contact only qualified
personnel.
16) Installation must be carried out only by qualified and experienced personnel and in full
compliance with current regulations.
17) Anything not expressly provided for in these instructions is not permitted.
18) This manual is intended for professional installers or competent persons only.
RECYCLING AND DISPOSAL
This product is built with different materials. The major parts (aluminum, plastic, iron, wires) are solid
urban waste. They can be recycled through collection and disposal in authorized centers. Other
components (control boards, etc.) may contain pollutants. They need to be removed and hand over to
companies authorized to recover and dispose them. The packaging (paperboard, plastics etc.) are solid
urban waste and they can be disposed of without any problem, simply performing waste collection for
recycling. Before proceeding it is always recommended to verify local specific norm for disposal.
PLEASE RECYCLE!