Sesamo PROSWING R, Руководство пользователя

Страница: 21 / 48

21
SESAMO PROSWING
is no lock the door will be blocked with the motor (if selected
parameter 14).
Stop
open
Automatism sends door in fully open position.
Opening anti-crushing
If door touches an obstacle whilst opening it stops movement for
few seconds. After a while door closes completely at low speed.
Sensibility is adjustable through parameter 06 (see paragraph
“Parameter adjustment display”) .
Closing anti- crushing
If door touches an obstacle whilst closing it stops, then opens
completely at low speed. After closes at slow speed. Sensibility is
adjustable through parameter 06 (see paragraph “Parameter
adjustment display”).
ELECTRIC LOCKS SETTING
ID
DESCRIPTION SETTING DEFAULT
09 Lock voltage
(1)
0 = 12 VDC
1 = 24 VDC
0
10 Electric lock type (2)
0 = Not used
1 = Impulsive with mechanical relock on closing
2 = Maglock (only24Vdc)
3 = Magnetic bolt
4 = Motorized
5 = Impulsive with relock at power off
6 = Magnetic with delayed relock (only24Vdc)
2
11 Opening delay (3)
RANGE: 0 ÷ 9
Time depends on the type of electric lock
2
12
Closing force of
electric lock
(4)
RANGE: 0(min) ÷ 9(max) 5
14
Activation of the
electric lock or motor
closing according to
the logic selected
(5)
3 = Proswing R mag lock always active on logic ONE
radar and TWO radars (automatic)
3
15 Aux input 1
4 = Lock feedback
(6)
5 = Command unlocking (7)
0
16 Aux input 2
4 = Lock feedback
(6)
5 = Command unlocking (7)
1
17 Aux output 1 5 = Lock command repeat 0
18 Aux output 2 5 = Lock command repeat 1
(
1 ) It is possible to manage electric locks 12 and 24 VDC (Parameter 09) with maximum power
15W. For maglocks use only 24 VDC
(
2 ) Compatibility with the following types of electric locks:
TYPE PAR
.
VALUE OPERATION
2-
ELETTROMAGNETE
(
MAGLOCK
)
10 2
See Fig.26 – Magnet, keep door closed , if
released, the door is free. It does not require a