Sesamo PROSWING R, Руководство пользователя

Страница: 16 / 48

16
SESAMO PROSWING
To properly see the display set the jumper according the opening direction of the wing as
shown in Fig.27.
La modalità di programmazione è la seguente:
1.
Select parameter thorough push button [+] and [-]; press [ENT] to enter in the
adjustment procedure.
2.
In adjustment procedure, parameter value is indicated in flashing mode. Press [+]
and [-] to change value, press [ENT] to memorize value and press [ESC] to come back to
parameter selection.
3.
During procedure is active a timeout; if no push buttons are pressed for 10 seconds,
system exit from adjustment mode.
4.
To validate teh commandit is necessary to press continuosly [ENT] for 5 seconds,
after validation the display will return to previous position.
ID
DESCRIPTION SETTING DEFAULT
01 Opening speed
RANGE: 20°/s ÷ 70°/s
(step of 5°/s)
60
02 Closing speed
RANGE: 10°/s ÷ 40°/s
(step of 5°/s)
20
03 Idle time
RANGE:
0 ÷ 60 seconds
62 = 2 min
63 = 3 min
64 = 4 min
0
04
Idle time in Low
Energy RANGE: 5 ÷ 60 seconds (adjustment step of 1 second)
5
05
Closing speed with
spring (PROSWING S) RANGE: 1 ÷ 9
(1 minimum speed, 9 maximum speed)
5
Force in closing
position
(PROSWING M)
RANGE: 0 – 9
(0=no force, 9= max force)
0
06 Anti-crushing
RANGE: 1 ÷ 9 It is applied both for opening and
closing (1=more sensitive; 9=less sensitive)
5
07
Acceleration and
deceleration RANGE: 5 ÷ 30
It is applied both for opening and closing
30
08 Approaching angle
RANGE: 10 ÷ 40
[it modifies both parameters (closing 1/2 of the
opening)]
20
09 Electric lock power
0=12 VDC
1=24 VDC
0
10 Lock type
0 = Lock not installed
For different type of electric locks please refer to
paragraph “electric locks setting”
0
11
Opening delay
RANGE: 0 ÷ 9
Timing depends on the type of electric lock:
please refer to paragraph “electric locks setting”
2
12 Lock closing force RANGE: 0(min) ÷ 9(max) 5
13 Single/Master/Slave
0 = Single
1 = Double Master
2 = Double Slave
0