SerVision MVG 400, Руководство по установке

Страница: 30 / 40

SerVision MVG400 Installation Guide
Connecting the GPS Antenna 29
Connecting the GPS Antenna
A GPS receiver is built into the unit. When the GPS antenna is connected to the unit, this receiver can be used to
track the location of the vehicle in which the MVG400 is installed.
 To connect the GPS antenna:
1. Connect the supplied GPS antenna cable to the GPS Antenna connector on the rear of the unit.
2. Place the other end of the antenna as high up as possible in the vehicle or on the roof of the vehicle. Make sure
the box at the end of the antenna is horizontal and is facing up (smaller side up). If possible, place it in a
location in which there are no obstructions between it and the sky.
Figure 26: GPS antenna cable
The box at the end of the antenna contains a magnet with which you may be able to attach it to the roof of the
vehicle. Alternatively, you can attach it in its intended location with double-sided tape. Regardless of which
method you use, make sure the antenna is attached securely to the vehicle so that it will not come loose when
the vehicle moves.
Box facing up