27
28
T: 0800 0124 382
T: 0800 0124 382
CLEANING AND CARE
Transportation:
Before transporting your Oven, make sure that it is disconnected from the gas and electrical
supply:
If you need to transport your Oven, use the original case and follow the transportation
instructions on the case:
Securely tape the upper parts of the cooker and the caps, crowns and pan supports to the
cooker panels. Place some paper between the upper cover and the cooking panel.
Cover the upper cover, and then tape it to the side surfaces of the Oven. Use tape to secure
cardboard or paper onto the front cover of the Oven’s interior glass.
Cover the wire grill and trays in paper to prevent them from damaging the Oven while in
transit.
If you do not have the original casing, prepare a carriage box so that the external surfaces (both
glass and painted) and protected from exterior forces.
Enamelled Parts:
Clean frequently with warm soapy water and then dry with a cloth.
Do not wash enamelled parts while they are hot and never use abrasive powders or
abrasive cleaning materials.
Do not allow vinegar, coffee, milk, salt, water, lemon or tomato juice to remain in contact
with the enamelled parts for long periods of time.
Stainless Steel:
Clean frequently with warm soapy water and a soft sponge. Dry with a soft cloth.
Do not use abrasive powders or abrasive cleaning materials on stainless steel parts.
Do not allow vinegar, coffee, milk, salt, water, lemon or tomato juice to remain in contact
with stainless steel parts for long periods of time.
Gas Connection Pipe:
Periodically check the gas connection pipe. If there is a defect contact the Servis helpdesk. We
recommend the gas connection components are changed annually. If there is a defect found
when operating the control knobs, cooker or oven, contact the Servis helpdesk or a registered
service engineer.
