Page 4
UNIT SET-UP
WASH ALL PARTS PROPERLY
BEFORE EVERY USE.
See page 6.
into shroud.
Position #10 can(s) or stainless steel jar(s)
between bumps at bottom.
into slot in base of shroud.
INSERT REMOVABLE BOTTOM
1
SET THERMOSTAT KNOB
6
INSTALL LID ONTO SHROUD
4
Align lid hinge holes onto pivot pins
on shroud.
Press lid hinges inward towards each other
until pivot pins fit into hinge holes.
PLUG CORD
into power source.
5
to recommended serving temperature.
To heat unit faster, thermostat may
TEMPORARILY be rotated to maximum.
INSTALL TOP ONTO SHROUD
3
INSERT DIP CONTAINER
2
TIP:
Stainless steel jars are
available. Order item #94009.
(Stainless steel jars are
included with 230V units.)
