background image

Part Number STH14 5/09

11

WATER FILTERS

It is recommended that proper water filters treat the 
water supply for the beverages. There are two basic 
filters commonly in use.

1. Pre-filter, or sand filter. This filter removes any 

foreign matter from the water down to 25 microns 
in size. 

2. Carbon or activated charcoal filter is also used. 

This filter will reduce chlorine and other 
chemicals, off-taste and odor. Some of the higher 
quality filters may reduce organic compounds 
(bacteria) in the water.

Do not use a filter containing any type of phosphate on 
the beverage system. Phosphate as used for scale 
reduction will cause the beverage to lose its 
carbonation and become “flat” quickly.

WATER PRESSURES

Dynamic (flowing) water pressures to most 
carbonators should be a minimum of 40 PSI 
(1.38 bar). Water pressure to dispensers for 
noncarbonated beverages should be a minimum of 
50 pounds (22.7 kg). These pressures are minimum 
operating pressures, not static pressure.

SYRUP BASICS

Your concentrated syrup containers should be stored 
in a cool dry location that is easily accessible. Any 
extremes in temperature can wreak havoc with the 
quality of the product. For best results, the syrup 
should be maintained in an environment between 40° 
and 90°F (4.4° and 32.2°C).

STH14.book  Page 11  Monday, May 4, 2009  1:48 PM

Содержание STH14













































































































































































































Отзывы: