Servend STH14, Руководство техника

Страница: 105 / 204

Part Number STH14 5/09 105
4. Locate the control board that corresponds with
the valve(s) and/or dispense point you want to
brix.
5. Press the program button and hold for 3 seconds
or until the LED displays 1. Press the program
button again until 2 is displayed on the control
board LED display.
NOTE: Programming one board at a time will make it
easier for you to identify the corresponding valves and
dispense points. See Flav’R-Pic (FRP-250)
Programming in this manual for more detail on all
programming modes.
6. With a board in Mode 2 you can now brix any
water or syrup valve that corresponds to the
board. Use the chart above to identify the valves
and which board they correspond to. See the
illustration that follows for more assistance.
Brixing information can also be found on the right
hand side of the control board cover label. By
using this label in combination with the plumbing
label you will be able to identify each valve, water,
and/or syrup combination.
S9 (Syrup 9) on Valve 15 is the only syrup that does not correspond to
the side it is mounted to. Both visually and functionally all other valves,
touch pads, and dispense points correspond with the board on the
same side to which they are attached.
S5
S4
F2
F1
S9
S8
F3
F4
C1 S1 S2 S3 S6 S7 C2 NC2 C3 NC3 S11 S10 S15 S14 C4 S16
F6
F5
F7
F8
S13
S12
S1 S3
S2 S4
S5 S7
S6 S8
F1
F2 F4
F3
N1 N3 N2
S1, S3,
S2, S4
C1
S5, S7,
S6, S8,
C2, NC2
S12 S10
S11 S9
S16 S14
S15 S13
F5
F6 F8
F7
N4 N6 N5
S9, S11,
S10, S12,
C3, NC3
S13, S15,
S14, S16,
C4
F1, F3,
F2, F4
F5, F7,
F6, F8
= WATER
= SYRUP
= FLAVOR
SHOT
LEFT SIDE
CONTROL BOARD
RIGHT SIDE
CONTROL BOARD
Valve Controls - C1, C2, NC2,
S1-S8, F1-F4
Valve Controls - C3, C4, NC3,
S9-S16, F5-F8
Valve 14 Valve 15
Valve 13 Valve 12
Valve 8 Valve 9 Valve 10 Valve 11
Valve 4 Valve 3 Valve 2 Valve 1
Valve 6 Valve 5
Valve 7
STH14.book Page 105 Monday, May 4, 2009 1:48 PM