Installation Instructions
Section 2
2-18
Part Number 020004000
10/13
ADA KEY PADS
These instructions are for installations with this option.
1. Remove power from the unit.
Splash Panel Removal
2. Remove the splash panel from the unit by removing the
drain pan to gain access to the two (2) phillips head
screws holding it in place.
ADA Wiring
3. Route the ADA ribbon cable under the drain pan.
4. Continue routing the ADA cable up to the ADA harness
clipped to the wall of the CEV and connect.
5. Neatly tuck in and take up any slack remaining in the
ADA ribbon cable so it will not be in the way of any
moving parts or panels when they are placed back on
the unit.
Drain Pan & ADA Touch Pad Box
6. Attach the drain pan to the unit.
7. Center the ADA Key Pad Box with the unit in front of the
drain pan and secure into place.
8. Apply corresponding drink labels to the ADA key pads.
NOTE: Drinks correspond from left to right on the left side of the
unit, and right to left on the right side of the unit. If buttons are not
used they will be blanked out. The Cubed/Crushed buttons in
the center are only utilized on units configured with the
Selectable Ice feature.
(
See ADA Key Pad Matrix Section 2-19
)
Drain Pan
ADA Ribbon
Cable
ADA Box
Internal ADA
Harness
ADA
Harness
ADA Box
Ribbon Cable
ADA Wire
Harness Clip
Important
If mounting the ADA Box directly in front of the drain pan
on the counter top leave a minimum of 1 inch space
between the bottom edge of the drain pan and the ADA
Box to allow space for drain pan removal. CEV units may
need more space for drain pan removal, mounting to the
front edge of the counter top may be necessary.
Connected
ADA
Cables
ADA Box
Drain
