TOC EVOLUTION:
USER &
MAINTENANCE MANUAL
Page:
6/74
Instructions No.: 10844
This document is the property of SERES and cannot be reproduced without authorization
3 Warranty conditions
3.1.
Reminder of the main warranties conditions applicable to the analyser
Our general terms of warranty are applied to this analyser and integrated in our general terms of sale
downloadable on our website.
One year warranty (Spare parts and workshop service) within the framework of normal conditions of
operation and maintenance specified in this book.
Normal operation conditions. Only follow-up of the rules of reagents preparation supplied by
MANUFACTURER Environment guarantees the analyzer’s good operation. In case of non-
observance of the rules of reagents preparation Manufacturer reserves the right to refuse the one-year
manufacturer warranty for the supplied apparatus.
3.2.
Security instructions
3.2.1.
Safety Regulations
To avoid injury to persons caused by electricity, please respect all the safety regulations of this book.
The equipment should to be used exclusively with a ground plug.
If the equipment is used in a way not specified by the manufacturer, the protection provided with the
equipment can be affected.
Any spare part has to be replaced exclusively by a qualified person using only the parts specified by the
manufacturer. It is always recommended that all power supplies are switched off before dismounting or
replacement of any component.
For any intervention on the hydraulic part of the analyser, wear adapted protections (protective clothing,
gloves, and glasses).
Please, do not use this equipment if there is flammable liquids or vapours, this could represent a risk for
security.
Use UV protective glasses for each intervention on the analyzer or if the lamp is on.
3.2.2.
Analyser’s characteristics
240V AC (110VAC on request)
50/60hz
All wirings have be in accordance with local standards and realised by a skilled and authorized electricians.
The equipment must be connected downstream of a secure electrical installation.
All wirings and connections (electrical, hydraulic …) should be done according to local regulations of the
country in force and only by qualified authorized and skilled personal. The equipment warranty won’t be
guaranteed by the manufacturer in case of no observance of the standards and regulations reported in points 8
and hereafter in this book.
3.2.3.
Environmental conditions
Relative humidity
5% to 95% (without condensation)
Temperature
5 to 40
C
Pollution level
2
Installation category
II
Maximum altitude
2000m.
