32
57.
Keypad Tone and Warning Tone Setting
1.
While off-line, press key and the screen displays “CALL LOG”.
2.
Press or key to scroll to “HS SETTINGS”.
3.
Press key to confirm.
4.
Press or key to scroll to “TONE SETUP”.
5.
Press key to confirm.
6.
press or to display either “KEY TONE”, “BATTERY
LOW” or “RANGE ALARM”
Key Tone select
1.
While “KEY TONE” is shown, press key and the screen displays either
“ON” or “OFF”.
2.
Press or to display “ON”
3.
Press key to confirm and the screen displays “KEY TONE” again.
4.
Press key to exit to off-line.
Battery Low Warning Tone
Detailed setting step is similar to that of setting the KEY TONE.
(Note: While talking, there will be a “di” sound when the battery is low if the
ALARM is set to ON. While off-line, there will be no alarm sound; only battery
capacity symbol is displaying on screen.)
Out-Of-Range Warning Tone
Detailed setting step is similar to that of setting the KEY TONE.
(Note: While talking, there will be a long “di” sound when the handset is
out-of-range from the base if the RANGE ALARM is set to ON.)
33
58.
Call Waiting
You must subscribe to Call Waiting service from your local phone company in
order to enjoy this convenience.
1. While on a call and there is a new call coming in, you will hear a short beep tone
in your receiver signifies a new call is waiting.
2. Press the key once and it will switch you to the second party and place
the first party on hold.
3. If you want to go back to the first party, press the key again.
To end the first call but keep the second (new) call
1.
Press key while on the first call ends that call.
2.
Press key jumps back to the second (new) call.
3.
Press key to end the call.
59.
Forward an Incoming Call from Handset 1 to Handset 2
1.
On Handset 1, press the key and then press “2” on the
keypad. This pages Handset 2 while putting the outside call on HOLD.
2.
When Handset 2 rings, press key on Handset 2 to
answer the page.
3.
Over the intercom, tell Handset 2 that an outside call is waiting.
4.
Press key on Handset 1 to transfer the call and then press
key on Handset 1 to exit.
(Note: If within 30 seconds there is no answer, the call will ring handset 1.)
