20
33.
Line Indicator (optional feature)
1.
This indicator is available on some models and it indicates the status of the
phone line connection. It should be normally off.
2.
If it shows a steady light, this indicates the phone line is not connected,
Please verify phone line connection, or try a different phone cord / phone jack.
34.
Register a New Handset to the Base
(Note: Each CL-60P is pre-registered in the factory is ready to use out of the box.
You only need to do this step if you bought an extra handset for the system. A
maximum of five handsets is allowed)
1.
Press key on the base for about 6 seconds while off-line, the base
starts flashing followed by a loud beep. This indicates the base is ready for
handset registration. (Please complete the following steps in less than 120
seconds).
2.
While off-line, press and hold the key on the side of the handset for
about 5 seconds. It will beep once and the screen displays “SEARCHING
1”.
3.
Wait about 10 seconds for registration to take place. A long “du di du” sound
indicates success.
(Note: After registering the handset to base, the antenna symbol will appear
steady on the top left corner of the LCD. If handset and base aren’t registered,
the antenna symbol and handset name will be flashing.)
21
35.
Handset De-Register
Note: This function is used when there is a need to free up a handset registration,
so a new handset may be added to the base.
1.
Press key while off-line, and the screen displays “CALL LOG”.
2.
Press or key to scroll to “BS SETTINGS”
3.
Press key and the screen displays “DELETE HS”
4.
Press key and it displays PIN? Then press number keys to input
password to confirm. (factory default PIN = “0000”)
5.
Press key and it displays the handset for de-register, or press
or to select other handset to de-register.
6.
Press key with a sound of “di du” meaning successful de-register, if
sounds of “di…”, it means failed de-register. (Note: The handset on which
this step is being performed can not be de-registered)
7.
Press key to transfer to off-line.
36.
De-Register All Handsets
1.
Press key of base for 5 seconds and the base red light starts
flashing.
2.
Press the key again of base seven more times at a normal pace, the
ringer flasher indicator should flash at a faster speed than before indicating
de-register process is in progress.
3.
De-register is complete when the indicator light goes out followed by a beep.
4.
All previously registered handsets are now de-registered.
5.
You must register the handsets you want again.
37.
Area Code Setting
1.
Press key while off-line and it displays “CALL LOG”. Press or
key to scroll to “HS SETTING”.
