18
5.
Where 150 is the maximum number of entries and xxx represents the actual
entries.
6.
Press to end.
CL-60P Base Functions
26.
Making a Call
1.
Press the Talk key and dial the number using the key pad. Press Talk
again to end call.
2.
Press Vol+ or Vol- to adjust your desired volume level.
27.
Mute a Call
1.
While on a call, press “Mute” key to mute the speakerphone.
2.
Press “Mute” again to un-mute.
28.
Page Handsets
1.
Press the key to make the base call your handset. The base will
make a deep loud sound calling for the handset. Your handset will start ringing
to help you locate it.
2.
Press the key on the handset or the key on the base to stop the
paging.
29.
Program a number into a photo memory
1.
While off line, enter the phone number on the key pad.
2.
Press and hold MEMORY for 3 seconds, then press the key (1-0) you
wish to store the number. You will hear a “du du” sounds as a confirmation.
3.
If you wish to replace any number, repeat steps 1-2.
19
4.
You can customize each button with your own picture. Use our cutting guide
template to help you guide cutting out pictures.
30.
Dialing from photo memory
1.
Press and hold MEMORY key for 3 seconds and then press the desired
memory number on keypad. Then the CL-60P will go on-line and dial out.
2.
Press Talk to end the call.
31.
Base Ringer Tone and Volume Setting
1.
While off-line, press key on handset and it displays “CALL LOG”.
2.
Press or key to scroll to “BS SETTINGS”.
3.
Press key and it displays “Delete HS”.
4.
Press or key and scroll to ”RING SETUP”.
5.
Press key and the screen displays “Melody 1”. Base ringer should
ring. Press or key to listen to different ring melodies (5).
6.
Press Vol + or Vol – on base to adjust ringer volume or to shut it off.
7.
Press key to save the ringer tone and volume settings.
Note: While the phone is ringing on an incoming call, you may also press either
Vol + or Vol - key to adjust the ringer volume.
32.
In-Use Indicator
1.
This is a multi-purpose indicator. If it shows a steady light, that means you
are on-line and using the phone.
2.
It flashes (fast) on an incoming call. This flashing indicator also indicates
that someone is using an extension phone on the same line.
3.
It flashes (slow) when you are doing memory programming or entering phone
number.
