Sequoia LISST-ABS, Руководство пользователя

Страница: 32 / 40

28
Appendix A: LISST-ABS Cable Wiring and Connector Pinouts
Details of
Underwater
connector on
LISST-ABS
Bulkhead
Connector
numbering
Cable
Connector
Numbering
This appendix details the configuration of the LISST-ABS connectors and
cables so that it can be connected to the dataloggers. We will start at
connector on the LISST-ABS and work toward the end of the long cable.
The endcap connector on the LISST-ABS is an Impulse MCBH8-M-P, wired
as shown below. Mating connector is MCIL8-F-S.
1. Common
2. Supply voltage, 10 to 18 V
3. Common
4. RS232 transmit
5. RS232 receive
6. SDI-12 input/output
7. Analog output
8. Common
The Common pins are interchangeable and connected to each other inside
the ABS.