Sequoia LISST-ABS, Руководство пользователя

Страница: 13 / 40

9
LISST-ABS and SDI-12
Best practices
In order to obtain the most accurate results it is recommended
that the LISST-ABS collect a 30 second or longer average. The
LISST-ABS is more sensitive to larger particles and the sample
volume is smaller. Therefore, to get good representative
measurements an average of a larger volume of water is
recommended. Using the M1!, M2!, M3! Or M4! Commands will
acquire an average of 30, 60, 120, or 300 seconds.
The LISST-ABS will remain powered between SDI-12
commands. If low power consumption is required it is
suggested that the LISST-ABS be powered down between
measurements to conserve power. The M commands can be
sent immediately after power up.
For suggestions on mounting, cleaning and maintenance
please see Section 2.6.