Sepura SC21 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 41

background image

Original Instructions: ENGLISH

Document Number: MOD-18-2216

Document Issue: 1.2

Copyright

© Sepura Limited 2002–2019 All rights reserved.

No part of the information contained herein and the other referred documents may be copied,
distributed or transmitted by any means to any other party without prior written permission of Sepura
Limited. The distribution of this document may require a Non-Disclosure Agreement (NDA) between
Sepura Limited and their agents or customers.

This document, the referred documents and the described product are considered protected by
copyright according to the applicable laws.

Disclaimer

Although every reasonable effort has been made to ensure the accuracy of the information contained
herein and any other referred document, this should not be construed as a commitment on the part of
Sepura Limited and the liability of Sepura Limited for any errors and omissions shall be limited to the
correction of such errors and omissions. Sepura Limited welcomes any comment and feedback as a
way to improve any delivered documentation. The information contained herein has been prepared
for the use of appropriately trained personnel, and it is intended for the purpose of the agreement
under which the information is submitted. Any party using or relying upon this information assumes full
responsibility for such use and in no event shall Sepura Limited be liable to anyone for especial,
collateral, incidental, or consequential damages in connection with or arising out of the use of this
information. The information or statements given in these documents regarding the suitability, capacity
or performance of the mentioned hardware or software products cannot be considered binding but
shall be defined in the agreement made between Sepura Limited and the customer. Sepura Limited
reserves the right to revise these documents and to make changes to its content at any time, without
prior notification.

Trademarks

The Sepura logo and some product branding logos and names are registered trademarks of Sepura
Limited.

All other trademarks appearing in this document are the property of their respective owners.

Contact Details

Sepura Limited

9000 Cambridge Research Park

Beach Drive

Waterbeach

Cambridge

CB25 9TL

United Kingdom

sepura.com

«
1
2
3
4
...
»

Содержание SC21 Series










































Отзывы:

Нет отзывов

Похожие инструкции для SC21 Series

Бренд: Raymarine Страницы: 54

Бренд: Raymarine Страницы: 46

Бренд: AudioSonic Страницы: 45

Бренд: Ham International Страницы: 25

Бренд: Troy-Bilt Страницы: 12

Бренд: unicraft Страницы: 66

Musik Boy 50L RP 5240 LW

Бренд: Grundig Страницы: 8

Бренд: Sylvania Страницы: 12

Бренд: Belkin Страницы: 102

Бренд: Durabrand Страницы: 34

Бренд: QFX Страницы: 2

Бренд: C. Crane Страницы: 32

Бренд: Oakcastle Страницы: 24

Flexfiller 125D

Бренд: flamco Страницы: 44

Бренд: Midland Страницы: 16

Бренд: Midland Страницы: 18

Бренд: Kenwood Страницы: 2

Бренд: Panasonic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды