Sepura SC21 Series, Руководство по обслуживанию

Страница: 16 / 41

Uniform Stud
The uniform stud (part no. 300-01832) is used together with the available dock kit that provides
attachments for various types of belts (clothing) and locker or car dashboard mountings.
The stud is attached to the radio using the carrying aid attachment points on the back of the radio.
Removing the stud
1. Use a PZ1 screwdriver to remove the two screws securing the stud to the radio. Lift the stud
from the radio.
PZ1 x 2
Attaching the stud
Caution! Risk of damage to the radio. Ensure the uniform stud screws are
secure, but do not over tighten as this can cause damage to the cover. If using
a torque screwdriver, apply a maximum torque of
45 Ncm or equivalent.
1. Place the stud onto the back of the radio, aligning the two attachment points on the back of the
radio with the mounting holes on the stud.
2. Fit the stud into position and correct orientation as indicated on the stud. Using a PZ1
screwdriver, secure using the screws provided.
MAX 45 Ncm
PZ1 x 2
Do not over tighten
10 SC21 Series hand-portable radio