SENZIME TetraGraph Philips Interface, Руководство по эксплуатации

Страница: 3 / 20

SEN 257
Issue 2.1
06 October 2020 Page
1
of
29
1. Introduction
These instructions are intended to assist with the operation of the TetraGraph Philips
Interface and its connection to the TetraGraph Monitor and the Philips IntelliVue Monitors.
It is important that these instructions be read thoroughly and understood before using the
equipment.
Always inspect the TetraGraph Philips interface device for any physical damage or missing
parts before use. Make sure that the universal CAT5e cable is connected to the TetraGraph
Philips Interface module before use.
2. Abbreviations
CAT5e Category 5e network cable
EMG Electromyography
IVOI IntelliBridge and VueLink Open Interface
NMT Neuromuscular Transmission
PTC Post Tetanic Count
SPI Standard Parameter Interface
ST Single Twitch
TOF Train of Four
TOFcnt Train of Four Count
TOFrat Train of Four Ratio