SEN 257
Issue 2.1
06 October 2020
Page
9
of
29
Figure 6
. Screen shot from when Philips IntelliVue monitor displays NMT-numeric value
given by TOFcnt results.
Adding or removing displayed waves or parameters
On the Philips IntelliVue monitors it is possible to change the view settings to display the
wave or parameter of your preference. If you would like to add (or remove) any wave
representation, then you would have to use the specific menu system of your monitor. In
the below example in Figures 7, the Setup Device driver is used to change from the TOF
wave to the EMG wave on the MX550 monitor.
Different IntelliVue models might utilize a
different set of menu functions to obtain the same result. Please consult your IFU for Philips
IntelliVue for more information.
