SEN 257
Issue 2.1
06 October 2020
Page
6
of
29
11. Instructions for connecting
Do the following:
Connect the TetraGraph Philips Interface to the RS232 port of the TetraGraph
Monitor. The RS232 port is shown to the left in Figure 3.
Figure 3.
The RS232 port of TetraGraph Monitor allows external devices to be connected.
After inserting the TetraGraph Philips Interface to the TetraGraph Monitor, connect the other end of the TetraGraph Philips
Interface to the Philips IntelliVue Monitor via an interface module such as EC10 or EC40
(provided by Philips)
.
Consult the user’s manual for
the Philips IntelliVue monitor for Philips monitor specific
handling.
Consult the IFU of the TetraGraph Monitor for TetraGraph specific handling.
The connection of TetraGraph Monitor to the Philips IntelliVue Monitor via the TetraGraph
Philips Interface is recommended to take place before the patient is connected to the
system.
When the TetraGraph Monitor is connected to the Philips EC10 module using the
TetraGraph Philips Interface, the Philips IntelliVue monitor will automatically display the
default labels described below.
RS232 port
