WORLD OF WELLNESS
Instructions for use for the user
p. 20/34
8.5. Entering the time
The sauna control unit is completely disconnected from the mains using the op-
eration switch
1
. The saved settings and the time are retained by an internal
battery. After putting the sauna control unit into operation for the first time, the
current time must be set.
1. Switching on the sauna control unit
Press ON/OFF switch
1
:
●
The indicator lights
9
–
c
go on for approximately 5 seconds.
●
The TIME
d
indicator goes on. (e.g. 12:00):
12:00
2. Setting the current time [0–24]
The TIME menu item must be activated: The indicator light
d
goes on.
a) Press the PROG/OK
8
button:
●
In the display
5
flashes:
12:00
or the previously set time.
●
The display
5
flashes for 20 seconds, and the setting must be started within
this time, otherwise setting mode will terminate and it must be selected again.
b) Using the UP/DOWN buttons
7
, set the desired value, e.g. [18:00].
c) Press the PROG/OK
8
button:
The display
5
stops flashing. The time has been set.
