WORLD OF WELLNESS
EN
Instructions for use for the user
p. 19/34
3.
Temperature = indicator light TEMP
a
:
the temperature of 10–110 °C in sauna mode
4.
Fan speed = indicator light VENT
9
:
fan speed of 0–100%, e.g. [50%]
The settings can be changed when using sauna operation. Sauna operation is
automatically stopped after a specified heating duration.
Note: What is the target value or the actual value?
Target value
= is the value that you set and would like to have.
e.g. 90 °C
Actual
= is the current value in the cabin.
e.g. 85 °C
8.4. Selecting menu items
Using the Up/Down
7
button, you can move up and down through the various
menu items.
If you have selected a menu function, press the PROG button
8
. The display
5
now starts to flash. When flashing, you can use the UP/DOWN
7
buttons to
change the value. Once you have set the desired value, press the PROG/OK
button
8
again. The value is applied and the display
5
stops flashing. Hold
-
ing the UP/DOWN
7
buttons down when the display is flashing will cause the
value to start to change rapidly.
Using the START/STOP button
6
, you can start direct operation and stop it
again later.
Tip rapid change for input values!
After holding the UP/DOWN buttons
7
for approximately 5 seconds,
the input values start to change rapidly.
