www.sentera.eu
MIW-GTE-EN-000 - 17 / 01 / 2018
4 - 11
back to the table of contents
PRODUCT DESCRIPTION
The GTE fan speed controller automatically regulates the speed of single phase
voltage controllable motors (230 VAC / 50—60 Hz) according to the measured
temperature values. The maximum speed can be adjusted via an internal
trimmer. The minimum speed and temperature setpoint can be adjusted via
external potentiometers. There are two product versions: -DM with Modbus RTU
communication and -DT with an integrated motor socket, power cable and a PT500
temperature probe. The fan speed will increase as the measured temperature
exceeds the setpoint temperature.
ARTICLE CODES
Code
Temperature range
PT500 temperature
sensor included
Schuko socket
for simple motor
connection
Integrated
power supply
cable
Modbus RTU
GTE21-60-DM
5—35
º
C
no
no
no
yes
GTE21-60-DT
5—35
º
C
yes
yes
yes
no
GTE-1-60-DM
15—35
º
C
no
no
no
yes
GTE-1-60-DT
15—35
º
C
yes
yes
yes
no
INTENDED AREA OF USE
■
Greenhouses and temperature controlled ventilation systems
■
For indoor use only
TECHNICAL DATA
■
Supply voltage: 230 VAC ± 10 %/ 50—60 Hz
■
Output load: max. 6 A
■
Potentiometer for minimum speed setting
■
Internal trimmer for maximum speed setting
■
Adjustable hysteresis and proportional range
■
Potentiometer for temperature setpoint range: 5—35 °C or 15—35 °C,
depending on the product version
■
PT500 temperature probe input (pre-wired for the -DT version and separately
available for the -DM version)
■
Modbus RTU communication (only in -DM version)
■
Schuko socket for motor connection (only in -DT version)
■
Euro plug for power supply (only in -DT version)
■
Pre-wired temperature sensor and supply cable (only in -DT version)
■
Enclosure: plastic R-ABS, V; grey colour (RAL 7035)
■
Protection standard: IP54 (according to EN 60529)
■
Storage temperature: -40—50 °C
■
Operating ambient conditions:
►
temperature: 0—40 °C
►
rel. humidity: <95 % rH (non-condensing)
■
Storage temperature: -40—50 °C
ELECTRONIC
FAN SPEED CONTROLLER
GTEX1-60
