Sensorsoft ST6105C, Руководство пользователя

Страница: 16 / 27

Sensorsoft Thermometer User’s Manual
The Sensorsoft device modular-jack connector uses the same UTP wire map as 10-BASE-T. It is
therefore possible to use this type of cabling system for Sensorsoft devices.
PIN-OUT OF THE MODULAR 8 POSITION JACK/PLUG ON A SENSORSOFT DEVICE
Note: Terminal No. 1 is the terminal to the extreme left as you face the cable opening, latch tab down.
Terminal Function UTP wire color
1 Receive Data white-green
2 Ground green
3 Transmit Data white-orange
4 Power +V blue
5 Ground white-blue
6 Ground orange
7 Power +V white-brown
8 Ground brown
The following are specialized tools and parts needed to make good quality cables:
Hand Tools:
Tyco Crimping Tool P/N 1-231652-0 or 2-231652-1, for modular plugs
Tyco 8 position modular die set P/N 853400-1
Tyco Crimping Tool P/N 90312-1 or 90302-1, for subminiature D pin or socket contacts
Tyco PROCRIMPER P/N 58448-2, for subminiature D pin or socket contacts
Tyco Insertion/Extraction Tool P/N 91285-1, for subminiature D connector contacts
Materials:
CP Technologies CAT5E UTP stranded, P/N E-207-4P-C5-LGY, 1000 ft, light gray, RoHS
(4 pair, 8-#24 AWG wires, category 4 or better, 75 C)
Tyco 8 position modular plug for round stranded wire cables, P/N 5-554169-3 (CAT4)
Tyco 8 position modular plug for round stranded wire cables, P/N 5-557961-3 (CAT5)
Tyco DB-9 receptacle subminiature D connector (crimp-snap-in), P/N 205203-1 or -3
Tyco DB-25 receptacle subminiature D connector (crimp-snap-in), P/N 205207-1 or 207463-1
Tyco socket crimp contact for subminiature D connectors, P/N 1-66504-0
Tyco pin crimp contact for subminiature D connectors, P/N 1-66506-0
16