Sensorsoft ST6105C, Руководство пользователя

Страница: 14 / 27

Sensorsoft Thermometer User’s Manual
Figure 2: C2100 cable is used to extend the cable length for model ST6105C. The DB-9F end of the cable plugs into a
DB-9M serial port. The DB-9M end of the cable plugs into the DB-9F connector on the SSD.
PIN-OUT OF THE DB-9F CONNECTOR ON MODEL ST6105C
Note: Only positions used in Sensorsoft device application are shown
Position Function
2 TX (data to computer)
3 RX (data from computer)
4 POWER (connects to DTR on computer)
5 Ground
7
POWER (connects to RTS on computer)
The following are specialized tools and parts needed to make good quality extension cables:
Hand Tools:
Tyco Crimping Tool P/N 90312-1 or 90302-1, for subminiature D pin or socket contacts
Tyco PROCRIMPER P/N 58448-2, for subminiature D pin or socket contacts
Tyco Insertion/Extraction Tool P/N 91285-1, for subminiature D connector contacts
Materials:
CP Technologies CAT5E UTP stranded, P/N E-207-4P-C5-LGY, 1000 ft, light gray, RoHS
(4 pair, 8-#24 AWG wires, category 4 or better, 75 C)
Tyco DB-9 receptacle subminiature D connector (crimp-snap-in), P/N 205203-1 or -3
Tyco DB-25 receptacle subminiature D connector (crimp-snap-in), P/N 205207-1 or 207463-1
Tyco socket crimp contact for subminiature D connectors, P/N 1-66504-0
Tyco pin crimp contact for subminiature D connectors, P/N 1-66506-0
14