Sensorsoft Thermometer User’s Manual
Installing the Sensorsoft Thermometer
Installation of the Sensorsoft Thermometer requires the following steps:
Choosing an Installation Location
Connecting the Sensorsoft Thermometer to a serial port
Starting the Sensorsoft software. (Please refer to the specific software manual that applies to
your installation.)
Choosing an Installation Location
Model ST6105C and ST6105J
Locate the Sensorsoft Thermometer close to the equipment or airflow you’re monitoring. Since
the ST6105C/J Sensorsoft Thermometer isn’t waterproof or weatherproof, keep the following
rules in mind:
Keep the Sensorsoft Thermometer housing out of contact with direct sunlight, UV exposure,
and dripping water.
Protect the Sensorsoft Thermometer from high traffic areas that could wear/damage the
housing or cable.
Never allow the plastic housing of the Sensorsoft Thermometer to come into contact with
harsh chemicals or cleaning agents. If the housing needs to be cleaned, use a damp cloth or
vacuum cleaner.
Use a Velcro fastener (P/N F1000 or F1001) to affix the Sensorsoft Thermometer to a stable
surface.
Model ST6154J
This Sensorsoft Thermometer has an external stainless steel probe, that may be exposed to liquids
or outdoor environments. The plastic housing of the ST6154J, however, has the same restrictions
as the ST6105C/J models above.
Connecting the Sensorsoft Thermometer to a serial port
If you have a ST6105C (C-Suffix) Sensorsoft Thermometer, plug its molded DB-9F connector
into an available RS232 serial port connector (DB-9M) on your computer or device server.
If you have an ST6105J or ST6154J (J-Suffix) Sensorsoft Thermometer, use the appropriate
C200X cable to connect this device to your computer or device server. (Please refer to the
Sensorsoft price list for available types of cables).
If you intend to make a custom cable for a J-Suffix Sensorsoft device, please refer to
Making
communication cables for J-Suffix Sensorsoft Devices.
6
Содержание ST6105C
Страница 2: ......
