Sensors & Software CONQUEST 100, Руководство пользователя

Страница: 76 / 143

Conquest 100 Line Scan
66
arrows on the keypad. If you are stopped, you can press the Back button at the bottom of the
screen to exit Line Scan mode.
6.8.2 Zoom (changing Depth and Position scales)
Pressing Zoom switches the menu at the bottom (Figure 6-9) allowing you to change the
horizontal and vertical scaling of the data you are viewing.
•
Depth : Conquest always collects to a depth of
about 36” (90 cm). However, you may
choose to display less depth to make targets easier to see.
In general, it’s a good idea
to set your displayed depth to 1.5 - 2 times the depth of your expected deepest target.
Figure 6-9: Menu seen when Zoom is pressed
Pressing + and
–
under the Depth button allows you the change the displayed depth.
The pre-
set values range from 12” to 36” (300mm to 1000mm). Figure 6-10 shows the
effect of varying the depth value.