Sensors & Software CONQUEST 100, Руководство пользователя

Страница: 112 / 143

Conquest 100 Transferring Data to a PC
102
Alternatively, if you want to export data from a specific Project (Conquest 100 Enhanced only),
click
No for now. Later on, when you are ready to export your data, from the main menu select
Setup > File Management and press Export Data ( Section 5.3.4).
11.1 Formatting USB Sticks
There may be times when a USB stick is not recognized by Conquest. In this case, you may
need to format the USB stick. Ensure that it’s formatted as FAT/FAT32 (NTFS will not work).
Also ensure that there are no hidden or write-protected partitions on the USB drive.
If the problem persists after formatting, try another USB stick.
11.2 Directory Structure
The directory structure on the USB drive can be viewed on your PC, and will look as follows:
•
GPR Data
•
Conquest 100
o
Export01
▪
Project1
•
Screenshots
•
Project1 Field Interp Report.csv
•
Project1.GPZ*
*Only with Conquest 100 Enhanced
If your system is not a Conquest 100 Enhanced, then all your screenshots will be in the Project1
directory, and no .GPZ files will be exported.
Each successive export of data will create a new directory called ExportXX, where XX is
incremented by 1 from the previous directory. This is to prevent over-writing data on the USB
stick.
If any Field Interpretations were added during data collection, these are saved in a .CSV file.
This is a spreadsheet file, which shows the positional information of any Interps made.
The System Info folder contains an APP.LOG file and a System Summary diagnostic report.
The APP.LOG file contains important information about system operation and may be requested
by Sensors & Software to help troubleshoot any issues.
Some of the output files are described and shown below.