12
Digital values are displayed in the middle field of the
screen. The order being edited is flashing.
Short-
press
of the buttons allow to go next order.
Long-
press changes order until the button is pressed:
left button decreases, right button increases. The
values change from 0 to 9 in cycle.
Short-press
of right button with flashing lowest order
confirms number input and terminates number editing
mode.
To change position of dot,
short-press
left button
with flashing highest order; the dot will flash between
orders. Its position is selected by long-press of
buttons (for parameters with fractional values).
For parameters with possible negative values, the
highest order can be set as
«-», it is displayed
between 9 and 0.
Глубина погружения
SEtt
d1
1.
2
00
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1.
2
00
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1.
2
00
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1.
2
00
м
ПМП-201А
Адрес: 002
Отступ от дна резерв
SEtt
d0
9
.200
м
ПМП-201А
Адрес: 002
Отступ от дна резерв
SEtt
d0
–
9.200
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1.20
0
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1 1.200
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1
.200
м
ПМП-201А
Адрес: 002
Глубина погружения
SEtt
d1
1.200
м
ПМП-201А
Адрес: 002
Picture 2.9.
Selection of the menu item parameter is performed as follows:
Current value of the selected parameter is displayed on the indicator board; Scroll-
ing of parameters values, forward or backwards, is made by long-press of left or right but-
ton. Selection (input) of the current value parameter is made by short-press of the right
button.
Transducer configuration menu
To enter configuration menu, simultaneously press both buttons in parameters view-
ing mode. The screen will display
SEt
(adjustment) and device address request (picture
2.10).
Input device addr
SEt
A 02
Menu location field
Address input field
Information
Enter
settings
