Sensitron SMART S-IS, Инструкция по эксплуатации

Страница: 38 / 40

ENGLISH
Pag. 34
10. Accessories
Table 6) Table of available accessories that can be purchased separately. Please contact Sensitron for further information.
Part number Description
STGD/AD3 Adapter to upgrade the protection from G to GD
ZMCAP/123 Stainless steel calibration adapter for all of Sensitron gas detectors. It al-
lows the right quantity of gas inlet to flow to the detector. It comes com-
plete with adapters to fit on the detectors' heads.
ZM/TEST/3 Permanent rain shield/test adapter
SL517 Stainless steel collector for gas detector with EPL Gb
SL647 Stainless steel weather protection roof, to protect gas detectors with ver-
tical mounted sensor head.
SL673 Stainless steel 2” mounting bracket
STG/AD.COND Duct mounting adaptor
ST.R5M
Remote kit to separate he head from the transmitter up to 5 m (cable not
supplied)
ST.R25M Remote kit to separate he head from the transmitter up to 25 m (cable
not supplied)
11. Instructions for disposal
When the device reaches the end of its life, it should be disposed of in accordance with local
waste management requirements and environmental legislation.
Employed materials are subdivided into the following categories:
³
Detector enclosure: Aluminium
³
Sensor head enclosure: stainless steel
³
Base board: Waste Electrical & Electronic Equipment (WEEE)
³
Sensing element: Waste Electrical & Electronic Equipment (WEEE)
Alternatively, the old device may be securely packaged, clearly marked for environmental
disposal and returned to Sensitron.
8. Repair
Repairing from the user side is not allowed; the user has to return the entire equipment to
the manufacturer with the warranty coupon for repairing in paragraph 12.
For further information see EN /IEC 60079-19.
9. Packing instructions
To grant a stout protection against impacts we recommend using the original package or
protect the device with bubble wrap sheets.