19
Adjusting settings via the operating menu
The extended menu “
Advanced Menu
”
Setting transmission frequencies and frequency banks – “Tune”
When you have selected one of the system banks and then select the
“
Tune
” menu, the bodypack transmitter automatically switches to
channel 1 of the frequency bank “
U
”. In this case, “
U.1
” briefly appears on
the display panel. Upon delivery, the channels of the frequency bank “
U
”
are not assigned a transmission frequency.
When you are in the “
Tune
” menu item, the RF signal is deactivated.
Via the “
Tune
” menu item, you can set a transmission frequency to be
stored in the current channel
or
you can select a different channel in the
frequency bank “
U
” and assign it a transmission frequency. It is vital to
observe the notes on frequency selection on page 22.
Setting a transmission frequency for the current channel
왘
Set the desired frequency.
Selecting a channel and assigning this channel a frequency
왘
Set the desired channel.
왘
Set the desired frequency.
왘
Press the rocker button until the “
Tune
” menu item appears.
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
왘
Press the rocker button until the “
Tune
” menu item appears.
왘
Press the
SET
button until the frequency bank selection
appears.
왘
Press the
SET
button.
The frequency selection appears.
SET
Select the MHz
value and confirm
Select the kHz value;
store the setting
543
.200 MHz
Tu n e
544.
200
MHz
B.Ch: 20.1
B.Ch: 20.1
Tu n e
Call up “Tune”
Advanced Menu
Tune
“Stored”
543.200 MHz
SET
SET
SET
SET
SET
Select the
channel;
store the setting
B.Ch: U.
1
Tu n e
Call up “Tune”
(special function)
Advanced
Menu
Tune
“Stored”
543.200 MHz
SET
SET
SET