Sennheiser evolution wireless 300 IEM G3, Инструкция по эксплуатации

Страница: 27 / 38

Using the operating menus
25
Operating menu of the EK 300 IEM G3 diversity receiver
Warnings Activates/deactivates the warning messages (color change and warning messages)
LCD Contrast Adjusts the contrast of the display panel in 16 steps
Reset Resets the transmitter
When resetting the transmitter, only the selected settings for the pilot tone and for the
frequency banks “
U1 ” to “ U6 ” remain unchanged. For an overview of the factory-preset default
settings, refer to the supplied frequency information sheet.
IP-Address Adjusts the IP address of the transmitter
Software Revision Displays the current software revision
Exit Exits the extended menu “ Advanced Menu ” and returns to the main menu
“ Warnings ”
AF Peak Audio overmodulation
RF Mute RF signal is deactivated
Exit Exits the submenu “ Warnings ” and returns to the extended menu “ Advanced Menu ”
Display Function of the menu item
Main menu “ Menu ”
Squelch Adjusts the squelch threshold, adjustment range: 5 to 25 dB
μ
V, adjustable in 2-dB steps, can be
switched off
Special function (for servicing purposes only):
With the squelch threshold set to “ 5 dB ”, you switch the squelch off by keeping the DOWN rocker
button pressed for 3 seconds. If you then press the UP rocker button, you switch the squelch on
again.
Easy Setup Scans for unused frequency presets, releases and selects frequency presets
Frequency Preset Changes the frequency bank and the channel
Name Enters a freely selectable name
Balance Adjusts the balance
Mode Selects stereo or Focus mode
High Boost Activates/deactivates the treble boost
Auto Lock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu “ Advanced Menu ”
Exit Exits the operating menu and returns to the current standard display
Display Function of the menu item
CAUTION! Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a very low value, loud
hissing noise can occur in the receiver. The hissing noise can be loud enough to cause
hearing damage or overload the loudspeakers of your system!
왘
Always make sure that the squelch is switched on (see above).
왘
Before adjusting the squelch threshold, set the volume of the headphone output to
the minimum.
왘
Never change the squelch threshold during a live transmission.