Sennheiser evolution wireless 300 IEM G3, Инструкция по эксплуатации

Страница: 10 / 38

Product overviews
8
Overview of the displays of the EK 300 IEM G3 diversity receiver
After switch-on, the diversity receiver displays the standard display “ Frequency/Name ”. For further illustrations and
examples of the different standard displays, refer to page 18. The standard display displays the operating states of the
diversity receiver. The display backlighting is automatically reduced after approx. 20 seconds.
Display Meaning
RF level “ RF ”
(Radio Frequency)
Diversity display:
Antenna input I is active
Antenna input II is active
RF signal level:
Field strength of the received signal
Squelch threshold level
Audio-Pegel „ AF “
(Audio Frequency)
Peak hold function
Modulation of the transmitter (channel-separated when the transmitter is set to
stereo mode)
When the display shows full deflection, the audio input level is excessively high.
Frequency Current receiving frequency
Name Freely selectable name of the receiver
Lock mode icon Lock mode is activated (see page 18)
Battery status Charge status:
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red LOW BATT LED is flashing:
Muting function
“
MUTE ”
“ Mute ” is only displayed on the “ Frequency/Name ” standard display (see page 18)
• when the transmitter’s RF signal is deactivated
• or when the transmitter is set to mono mode and therefore does not transmit a pilot tone
but the receiver’s pilot tone evaluation is activated.
or audio channels The audio channels are only displayed on the “ Frequency/Limiter ” and “ Frequency/High
Boost ” standard displays (see page 18)
Stereo
Focus
Pilot tone “ P ” Activated pilot tone evaluation
MHz
519.150
ew300 IEM
P
AF RF
MUTE
RF
AF