Using the SKP 500 G4
107
Advanced > Tune menu item
•
Configuring the transmission frequency and frequency bank U
When you have configured the bodypack transmitter to a system bank and
you call up the
Tune
menu item, channel 1 of the frequency bank
U
is auto-
matically set. The message
U.1
briefly appears in the display. In the factory
settings, the channels of the frequency bank
U
are not assigned to any
transmission frequency.
While you work in the
Tune
menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or se-
lect a channel in the frequency bank
U
and configure a transmission fre-
quency for this channel in the
Tune
menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷
Open the
Tune
menu item in the
Advanced
menu.
The frequency selection appears.
►
▷
Configure the desired frequency.
▷
Press the
SET
button.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a
channel
and assign it a frequency:
▷
Open the
Tune
menu item in the
Advanced
menu by pressing and hold-
ing the
SET
button until the frequency bank selection appears.
►
▷
Set the desired channel.
▷
Press the
SET
button.
The frequency selection appears.
▷
Configure the frequency.
Содержание EK 500 G4
