Synchronizing devices
111
Synchronizing devices
You can synchronize ew 500 P G4 series transmitters and receivers via the
receiver’s infrared interface.
You can adjust the
Parameters
to be transferred to the transmitter here:
“Advanced -> Sync Settings menu item”
To synchronize the devices:
▷
Switch the transmitter and the receiver on.
▷
Call up the
Sync
menu item on the receiver.
Sync
appears in the receiver’s display.
▷
Hold the infra-red interface of the transmitter in front of the infra-red
interface of the receiver.
The parameters are transferred to the transmitter. When the transfer is
complete, a tick appears in the receiver’s display as a confirmation.
Then the receiver will return to the current standard display.
►
To cancel synchronization:
▷
Press the
ON/OFF
button on the receiver.
An
X
appears in the display.
This icon also appears when:
•
no transmitter is found or the transmitter is not compatible.
•
no transmitter is found and the synchronization process automatically
ends after 30 seconds.
Содержание EK 500 G4
