Using the EK 500 G4
60
Advanced -> Sync Settings menu item
In the
Sync Settings
menu item of the
Advanced
submenu, you can con-
figure the parameters to be sent to the transmitters and activate or deac-
tivate transmission The parameters are defined separately for the SK, SKM
and SKP.
You can activate/deactivate the following parameters:
•
Sensitivity
•
Auto Lock
•
Mute Mode
•
RF Power
•
Phantom Power 48 V (only SKP 500 G4)
To configure a parameter and activate or deactivate transmission:
▷
Go to the parameter in question in the
Advanced -> Sync Settings
menu.
▷
Press the
SET
button to open the sub-item.
▷
Press the
UP
and
DOWN
buttons to set the value.
▷
Press the
SET
button to save the setting.
▷
Press the
UP
and
DOWN
buttons to activate or deactivate the check
box.
When the check box is activated, the value will be transmitted during
synchronization. If it is deactivated, the value will not be transmitted.
▷
Press the
SET
button to save the setting.
Содержание EK 500 G4
