Using the EK 500 G4
54
Easy Setup menu item
You can scan for unused frequencies using the
Easy Setup
menu item.
Switch off all transmitters before you perform the scan. If transmit-
ters are still switched on, they are detected as unavailable frequen-
cies and the frequencies that are actually available cannot then be
used.
To open the
Easy Setup
menu item:
▷
On the home screen, press the
SET
button to open the operating menu.
▷
Press the
UP
or
DOWN
button until the
Easy Setup
menu item appears
in the selection frame.
▷
Press the
SET
button to open the menu item.
▷
Adjust the settings as desired.
•
Scan New List
: Automatically searches for unused receiving frequen-
cies (frequency preset scan):
►
•
Current List
: Selects an unused frequency preset:
►
•
Reset List
: Releases all occupied frequency presets and selects an
unused frequency preset:
►
▷
Press the
SET
button to save the changes you made to the settings.
or
▷
Press the
ON/OFF
button to cancel the entry without saving the set-
tings.
Содержание EK 500 G4
